|
Title: TT225 - MAF sensor pin out - MAF signal wire Post by: vtraudt on July 31, 2019, 04:51:15 PM I want to connect an AEM WMI controller (with 0-5V input) to the MAF signal of my TT225 (stock MAF sensor).
Which wire has the 0-5V MAF signal?(https://scontent.fdet1-1.fna.fbcdn.net/v/t1.0-9/67479452_2349380298637783_4157956675321462784_n.jpg?_nc_cat=103&_nc_oc=AQlpF9VnuWdzn8zht751Lxr2_2gP2FNvbYvH1fOgW3hrh9GNzgjOkdqKvFXLNydzshA&_nc_ht=scontent.fdet1-1.fna&oh=9f535d80a174a2fe74310e32cc2f85fb&oe=5DDF97D0) Title: Re: TT225 - MAF sensor pin out - MAF signal wire Post by: IamwhoIam on August 01, 2019, 02:33:23 AM pin 5 is your 0-5v output, relative to pin 3, which is GND
Title: Re: TT225 - MAF sensor pin out - MAF signal wire Post by: vtraudt on August 01, 2019, 07:06:26 AM Thanks.
Here it is: (https://scontent.fdet1-1.fna.fbcdn.net/v/t1.0-9/67583425_2349663051942841_3132045153317945344_n.jpg?_nc_cat=103&_nc_oc=AQlXQxp_cXYMdVIPqi-gY33JRlBeDd6drbhQxUb_bnlGFvO5A_VOFeLaNdAAt9tMH_Kpa9sLtPQQ97ssjEHBhEze&_nc_ht=scontent.fdet1-1.fna&oh=ee46a18693652bee42879c15bd9e6d77&oe=5DD85EFB) |