|
Title: Bench setup - boot mode Post by: vtraudt on August 20, 2019, 05:22:59 AM I had bought my bench setup a few years ago, but was never very successful in boot mode ECU.
Since about a year, I don't think I was ONCE able to get into boot mode. Tried various cables, including exact same others have used successfully. Can someone sell me a working bench setup? Or check/fix/rebuild mine? Title: Re: Bench setup - boot mode Post by: dal on August 20, 2019, 10:08:20 AM Make yours. I bought the connectors on aliexpress (ECU and OBDII), and made the hardness using an 12V@2A power supply.
Title: Re: Bench setup - boot mode Post by: vtraudt on August 20, 2019, 10:21:20 AM Make yours. I bought the connectors on aliexpress (ECU and OBDII), and made the hardness using an 12V@2A power supply. Not good with those darn pins. I DO HAVE one, but suspect not working anymore. Bought from Nelson IIRC. Have power supply, the connectors (ECU, OBD2, etc). Just prefer someone to either redo (and check that it works) or at least test/verify. Or simply buy one from someone. Title: Re: Bench setup - boot mode Post by: dal on August 20, 2019, 01:21:18 PM I used to have an Aliexpress link with an ready harness, but I didnt found now :(.
|