|
Title: Me7.1.1 Tacho signal ? Post by: hummel on September 02, 2019, 07:09:33 AM Hi guys,
I have a MkV R32 BUB with a 022906032CE ECU in my golf mk1. Normally the Tacho signal comes from t121/37 but it doesn't seems like it is the case with this ECU, I believe it is only communicating through CAN. Is this an programable issue, and if so, is there anyone that can help me with opening for the tacho signal so I can get my rev counter to work. I attached my current file. Thanks. Title: Re: Me7.1.1 Tacho signal ? Post by: gocebrzi on October 13, 2019, 11:20:24 AM Pin 37 works, but you need new wiring for tacho
Title: Re: Me7.1.1 Tacho signal ? Post by: BlackT on October 13, 2019, 03:33:50 PM I think it is not posible, you must make some CAN to digital signal converter.
VSS input it can be changed via CWGGVFZG , but for tacho I didn't see there is a solution Title: Re: Me7.1.1 Tacho signal ? Post by: gocebrzi on October 13, 2019, 10:01:25 PM Is posible on my S3 8L works pin 37, no need for recoding.Pin 37 is empty ,you need new wire from ecu,i use signal for LPG and tacho, ecu 032J 2.8 24v
Title: Re: Me7.1.1 Tacho signal ? Post by: Kompiesto on October 20, 2019, 01:18:54 AM I done communication by canbus with me7.1.1g. What You need?
|