|
Title: BDM100 Umpteenth try Post by: tk81 on September 10, 2019, 02:55:57 PM Hi,
I've got my bdm 100 set up on win 10 (64), xp (32) on both setups I hear a relay click when I plug in the usb cable and when I click the "ON" button in either cmd or dimsport additionally, I've checked the cable & connections to ecu (all connections are connected) I've powered ecu and bdm, but still no luck are there any other tricks to getting this to read/write? my errors are as follows: CMD ® Technologies srl - MPCProg Ver. 3.1.0.1255 Dongle ID: 192 Date: 9/10/2019 12:53:13 PM Firmware Revision V.01 SN: 0258 ECU Communication Error +12Vcc power error or Communication error and from dimsport: Firmware Revision: V.01 SN: 0258 . . . . . . . . . . Interface communication error (E13) MPC version error (E06): 0x00000000 Part number error (E05): 0x00000000 Power error or communication error (E14) Thanks in advance! |