|
Title: 1.8t aum immo problem after flashing Post by: MichVu on September 11, 2019, 04:05:23 PM Hello guys,
So i decided to change my 150 flash file to the 180 one from auq with mpps I made backup without the problems as well as instaling auq flash file. The problem ocured when i started the car, runs like for a few seconds and goes out bcouse of immo, any ideas ? ;) Ps. Sorry if i posted thread in wrong place, im new here ;) Title: Re: 1.8t aum immo problem after flashing Post by: _nameless on September 11, 2019, 04:12:02 PM Immo2 vs immo 3. Flash s immo off Eeprom to the 95040
Title: Re: 1.8t aum immo problem after flashing Post by: MichVu on September 11, 2019, 04:18:43 PM Immo2 vs immo 3. Flash s immo off Eeprom to the 95040 Can you explain me clearly :D ? Im total newbie Guess i have immo3 couse immo 2 was in early g4 releases i have swap from 2k4 gti Title: Re: 1.8t aum immo problem after flashing Post by: fknbrkn on September 11, 2019, 06:41:32 PM You should use flash from engine with immo3
Now its time to bootmode cos you wont be able to flash it via obd due to immo mismatch Title: Re: 1.8t aum immo problem after flashing Post by: MichVu on September 11, 2019, 06:44:09 PM You should use flash from engine with immo3 But i uploaded backup flash with no problems twice( couse tried two difrent auq flashes) and the car works fine.Now its time to bootmode cos you wont be able to flash it via obd due to immo mismatch Title: Re: 1.8t aum immo problem after flashing Post by: Shocerote on November 04, 2019, 09:57:24 PM Hello guys, So i decided to change my 150 flash file to the 180 one from auq with mpps I made backup without the problems as well as instaling auq flash file. The problem ocured when i started the car, runs like for a few seconds and goes out bcouse of immo, any ideas ? ;) Ps. Sorry if i posted thread in wrong place, im new here ;) ok now you have immo2 vs immo3 you need to immo off that ecu to make it work paste your eeprom here so I can help you!! you will need bootmode harness to do that!! lmk |