|
Title: Replace 317cc with 386cc Post by: totti on September 20, 2019, 10:05:22 AM Hi,
I would like to change my 317cc injectors with the 386cc. Where can I find tutorial which maps need to be changed? Thanks Title: Re: Replace 317cc with 386cc Post by: ZakDodge on September 20, 2019, 10:39:44 AM Krkte and tvub need to be changed
Sent from my iPhone using Tapatalk Title: Re: Replace 317cc with 386cc Post by: totti on September 20, 2019, 11:46:21 AM Krkte and tvub need to be changed Sent from my iPhone using Tapatalk Can I copy the values from bin which is made with 386cc injectors? for example 1ML906032A Title: Re: Replace 317cc with 386cc Post by: nyet on September 20, 2019, 12:09:09 PM Can I copy the values from bin which is made with 386cc injectors? for example 1ML906032A Yes, this should work but you should sanity check the values. Title: Re: Replace 317cc with 386cc Post by: totti on September 20, 2019, 02:14:38 PM Yes, this should work but you should sanity check the values. Thanks. I've just compared 2 bins. 1ML906032A_0001_ori and 8N0906018H _0004_ori The TVUB and KRKTE values are not same. Which one should I use? Title: Re: Replace 317cc with 386cc Post by: AntonR on September 21, 2019, 08:47:18 AM +kvb, fkkvs
you can take it from 8N0906018K Title: Re: Replace 317cc with 386cc Post by: totti on September 27, 2019, 02:19:03 AM +kvb, fkkvs you can take it from 8N0906018K So I should copy kvb, fkkvs, tvub, krkte from 8N0906018H. Should I copy the whole table, or just the values? For example the fkkvs RPM parameters are different. Title: Re: Replace 317cc with 386cc Post by: gt-innovation on September 27, 2019, 05:18:42 AM You don`t need to copy fkkvs but you need to double check the trims and adjust fkkvs accordingly...even if you copy fkkvs it will be slightly off.
When you copy tvub be sure that you get the axis as well since sometimes it is a bit different. |