|
Title: Gear Detection Maps Allroad 2.7t Post by: streacy on September 26, 2019, 06:38:32 AM Hi,
I have read the section in the S4 wiki on gear detection maps and just would like some clarification. I have swapped my 2.7t allroad from auto to manual using a 2.5tdi allroad gearbox. I downloaded a 2.5tdi allroad bin and found the locations of the gear detection maps in hex editor. The question is do I now only change the exact locations referenced in the wiki (2 per gear)? The reason I ask is because each location is spaced i.e. 2,4,6,8 etc and the values inbetween 3,5,7,9 are not specified so shouldnt be changed? Also I am using an 551m s4 bin Any help appreciated, Thanks Sent from my iPhone using Tapatalk |