|
Title: 4b0920933g d11 request petrol Post by: Stoti on October 28, 2019, 12:43:53 PM Hello. I m searching 4b0920933g d11 dump for petrol 4 cyl engine. I attach 1.9 tdi dump from that one i have its obd read .
Title: Re: 4b0920933g d11 request petrol Post by: macxxx on October 29, 2019, 03:21:17 PM 933G was only diesel - you want to rescale it for petrol?
Title: Re: 4b0920933g d11 request petrol Post by: Stoti on October 30, 2019, 10:29:33 AM Yes. Can you point me what revision to search . I put jaeger tachometer plate or if u can point me what addres is located rpm calibration. Thanks.
Title: Re: 4b0920933g d11 request petrol Post by: macxxx on October 30, 2019, 02:59:50 PM test this one
Title: Re: 4b0920933g d11 request petrol Post by: Stoti on November 01, 2019, 01:35:05 AM Works like a charm. Thank you very much i appreciate it . Ignore warning lights i dont have bulb failure detect on my car . Thank you again.
Title: Re: 4b0920933g d11 request petrol Post by: macxxx on November 01, 2019, 07:37:37 AM Connect pin 14 , 15 , 16 of grey connector to ground - no fault on cluster from lights and washer fluid level ;)
Title: Re: 4b0920933g d11 request petrol Post by: Stoti on November 01, 2019, 01:00:42 PM I will try it tomorow its verry annoing . Thank you again .
Edit: works great I Title: Re: 4b0920933g d11 request petrol Post by: macxxx on November 04, 2019, 11:25:38 AM I did a lot of clusters swaps from jeager to fullfis VDO ;)
Title: Re: 4b0920933g d11 request petrol Post by: Stoti on November 04, 2019, 12:03:59 PM Sure u know how to do it perfect. I put this one only to control RNS-E because i dont have CAN bus on grey connector u put 5 and 6 pin can hi and can low and enable infotaitment in adaptation nex will be adding arduino and fis control to see boost instead external gauge . Hope i help other people in future like u . Thank you . :)
|