|
Title: seeking advice, uploaded list of mods to my .bin Post by: Maddog82 on November 22, 2019, 10:45:41 AM so as suggested a few of you.
I have made a list of my modifications to my .bin in a txt file and attached them. I implemented changes to (i hope) give me all I need to add 750cc bosch ev14 injectors, launch control & RPM to 7k also to delete J229, sai, cat, rear 02, evap. I have not yet scaled MAF. (70mm) this was already 70mm do I need to do it again?. if anyone would kindly give me any feedback (good and bad is welcome) I would be most grateful. regards luke 06A906032DR HW# 0261206887 SW#1037360128 Title: Re: seeking advice, uploaded list of mods to my .bin Post by: Maddog82 on November 22, 2019, 10:51:08 AM also
the engine is 1.8t 20v AUM Fully forged bottom end, ZRP Rods, STD size Wossner pistons, king race bearings ARP bolts std head atm (built head to go on) gt2860rs walbro 244 forge 007 2.5" intake & boost pipes Welly FMIC 6k smf vr6 stage 1 clutch 3" turbo back exhaust 1.25" tubular exhaust manifold sai delete cat delete 750cc bosch ev14 injectors 70mm maf Title: Re: seeking advice, uploaded list of mods to my .bin Post by: Maddog82 on November 22, 2019, 11:22:21 AM to save people from downloading, these are my modifications.
CHANGES implemented changes are to (i hope) give me all i need to add 750cc bosch ev14 injectors & launch control and to delete J229, sai, cat, rear 02, evap. please give me some feedback and if there is anything else i need to modify. KRKTE Stock, 0.10301 Modified, 0.04562 TVUB Stock, (7.96v=1.92) (10v=1.33) (11.97V=1.03) (14.01v=0.77) (15.98v=0.69) Moddified, (7.96v=1.57) (10v=0.95) (11.97v=0.62) (14.01v=0.41) (15.98v=0.27) TEMIN Stock, 0.75ms Modified, not modified? TEMINVA cannot find in tuner pro FKKVS not modified as i have not got here yet (no logs yet) ESKONF Stock, AA FF 00 F0 FF F8 FC Modfied, AA FF 00 30 FF F8 30 CWKONLS Stock, 3 Modified, 1 CLAHSH CLAHSHE CLASLPE CLASLVE CLATEVE Stock 3, Modified,0 CDTES CDLASH CDLATV CDSLS CDLSH CDHSH CDHSHE CDKAT Stock, 1 Modified, 0 CWKONABG Stock, 5 modified, 0 CLRSHK Stock, 16 modified, 5 FKHABMN_0_A FKHABMN_1,_A Stock, 0.80 Modified, 0 VNMX Stock, 20 Modified, 1.25 DNMAXH Stock, 200 Modified, 50 ITNMXH Stock, 655.350 Modified, 0 NMAX Stock, 6800 Modified, 4500 TMOTNMX Stock, 80.25 Modified, -48.00 TNMXH Stock, 0 Modified, 655.350 NMAXOG Stock, 6800 Modified, 7000 Title: Re: seeking advice, uploaded list of mods to my .bin Post by: aef on November 26, 2019, 07:16:01 AM start with the injectors at first
what about fuel trims on idle? Title: Re: seeking advice, uploaded list of mods to my .bin Post by: dal on November 26, 2019, 07:44:30 AM Where did you got TVUB data?
Title: Re: seeking advice, uploaded list of mods to my .bin Post by: Maddog82 on November 30, 2019, 03:59:32 PM start with the injectors at first what about fuel trims on idle? At this moment in time, I haven't even written this to my ECU, and I won't until I know its good enough to start with. My Idle trims I have not yet touched as I haven't got that far, I need to research and seek advice with those. So if your willing to shed any light id be most grateful. Title: Re: seeking advice, uploaded list of mods to my .bin Post by: Maddog82 on November 30, 2019, 04:00:49 PM Where did you got TVUB data? I searched through the internet to get a datasheet, do they look wrong to you? |