|
Title: 8D0907551C C-BOX Post by: danzzon on December 16, 2019, 06:20:35 AM Has anybody found a way to read the c-box via the obd2 port without having to use the k-line bypass? I've read around someplaces and seen that some people say it should work with mpps v13 but this far no luck.
Title: Re: 8D0907551C C-BOX Post by: IamwhoIam on December 16, 2019, 08:06:54 AM Nope and no point in doing it either, ECU is removed and read in boot mode in less than 20 minutes, why would you go through all this hassle?
Title: Re: 8D0907551C C-BOX Post by: danzzon on December 16, 2019, 09:26:42 AM Yeah im thinking about just going boot mode, but is the problem within the ecu or is it the cluster that is prohibit everything. Im debating on getting a m-box and use that instead since its has better definitions too but will the same problem persist with not being able to read via obd whilst the ecu is in the car?
Title: Re: 8D0907551C C-BOX Post by: armageddon on December 16, 2019, 10:00:09 AM Yeah im thinking about just going boot mode, but is the problem within the ecu or is it the cluster that is prohibit everything. Im debating on getting a m-box and use that instead since its has better definitions too but will the same problem persist with not being able to read via obd whilst the ecu is in the car? If you do not want to run a direct k-line you should Immo off the file so you can flash it with nefmoto on the bench. Not perfect, but at least you do not need to open ecu every time to boot mode. |