|
Title: Flashing dq250 Post by: MOOMO on December 17, 2019, 10:57:48 PM Hello fellows
My dsg dq250 cxx bought it tuned to stage 1 some brand ~ I wanted to upgrade to stage 3 file for but it seems I have a fault code on it That scared the tuner we won’t tune it until code is fixed the car drives, shift fine What’s your thoughts? Fault code is 18148 Title: Re: Flashing dq250 Post by: nyet on December 17, 2019, 11:12:49 PM Are you seriously going to make everyone look up what that code is? Why wouldn't you just put it in your post?
Title: Re: Flashing dq250 Post by: gremlin on December 17, 2019, 11:42:56 PM What’s your thoughts? Fault code is 18148 Why not look at the basic knowledge and think for yourself? http://wiki.ross-tech.com/wiki/index.php/18148/P1740/005952 Title: Re: Flashing dq250 Post by: MOOMO on December 18, 2019, 12:07:00 AM Why not look at the basic knowledge and think for yourself? http://wiki.ross-tech.com/wiki/index.php/18148/P1740/005952 I didn’t say what code is this ~ I want to know if I can flash my dsg while the code is there Cheers ~ Title: Re: Flashing dq250 Post by: vwaudiguy on December 18, 2019, 12:13:20 AM All of the sensors in the trans feed into the mechatronic. For this particular code, you can try to replace the clutch temp sensor by itself..50/50 chance it's just the sensor. You'll need to remove the mech to get it in/out. If that doesn't resolve, you'll need to have the mech replaced/ repaired. Tuner is on the right track with his decision.
Title: Re: Flashing dq250 Post by: MOOMO on December 18, 2019, 02:20:44 AM All of the sensors in the trans feed into the mechatronic. For this particular code, you can try to replace the clutch temp sensor by itself..50/50 chance it's just the sensor. You'll need to remove the mech to get it in/out. If that doesn't resolve, you'll need to have the mech replaced/ repaired. Tuner is on the right track with his decision. Thanks man This fault exists with the old mech, i replaced the mech but never changed the temp sensor so fault came again I just want to confirm that writing new file won’t damage The mech while writing the file because of this fault |