|
Title: Installing a new replacement ECU Post by: katoona on January 04, 2020, 04:54:50 AM I have a new ME7.5 ECU for my Golf GTI Mk4, and it is the exact same ECU as the one sitting in my car now. Same software id and same numbers.
I have read my existing bin file with Nefmoto software, and I want to transfer it to my "replacement" ECU. Can I install the new ECU in the car and flash it with my bin file (before I try to start the car), or will this not work? Why am I doing this - I want to make sure that my bin file (which have a edit of FVPDKLDUS settings) is working like it should, and I dont want to brick my current ECU. I have made sure the checksum is correct, but I am still afraid to mess up my current ECU, so I bought a similiar ECU from a used car. I am a newbie, and sorry if this question has been answered before. Title: Re: Installing a new replacement ECU Post by: katoona on January 04, 2020, 04:56:23 AM And a big thanks to this forum - it has been a lot of help to me.
Title: Re: Installing a new replacement ECU Post by: _nameless on January 04, 2020, 06:14:24 AM And a big thanks to this forum - it has been a lot of help to me. Unless it immo offed it wont flash threw port. Also car wont start unless immo offed or immo cloned.Title: Re: Installing a new replacement ECU Post by: katoona on January 04, 2020, 06:33:52 AM Ok, thanks.
Immo is off, so I guess I can flash it then :) |