|
Title: Blown chip. Why? Post by: JakeGT on January 04, 2020, 12:46:19 PM Hi,
I had an old ECU so have been learning how to flash etc. I tried it in the car but managed to blow a chip. I used MPPS to write original map (matching hardware & software numbers) Immo off using Universal Decoding 3.2 I'm not sure what the chip is? We live and learn. ;D Title: Re: Blown chip. Why? Post by: _nameless on January 04, 2020, 02:40:51 PM too much sauce
Title: Re: Blown chip. Why? Post by: gman86 on January 05, 2020, 05:07:30 AM Hi, I had an old ECU so have been learning how to flash etc. I tried it in the car but managed to blow a chip. I used MPPS to write original map (matching hardware & software numbers) Immo off using Universal Decoding 3.2 I'm not sure what the chip is? We live and learn. ;D Ye fucked it Title: Re: Blown chip. Why? Post by: BlackT on January 05, 2020, 05:45:06 AM How you manage to do this?
Title: Re: Blown chip. Why? Post by: JakeGT on January 05, 2020, 07:39:00 AM How you manage to do this? Honestly I have no idea. I thought even with writing the wrong map etc it wouldn't be possible? The only thing I can think of is a bit of solder or wire was lose in the ECU ??? Title: Re: Blown chip. Why? Post by: SQT on January 19, 2020, 11:34:22 PM Hi, write block number or chip markingI had an old ECU so have been learning how to flash etc. I tried it in the car but managed to blow a chip. I used MPPS to write original map (matching hardware & software numbers) Immo off using Universal Decoding 3.2 I'm not sure what the chip is? We live and learn. ;D Title: Re: Blown chip. Why? Post by: adam- on January 20, 2020, 12:59:15 AM Rear O2 is shorted.
Title: Re: Blown chip. Why? Post by: gremlin on January 20, 2020, 01:26:22 AM It's a CJ110 - control and amplifier circuit for the wide range lambda sensor.
Outside ECU connected to lambda before catalyst. Title: Re: Blown chip. Why? Post by: adam- on January 20, 2020, 02:10:51 AM *I meant front, soz.
Title: Re: Blown chip. Why? Post by: SQT on April 06, 2020, 02:26:51 PM It's a CJ110 - control and amplifier circuit for the wide range lambda sensor. yes it is, the binding is similar to me 7.1.1, but I don’t know how the author will correct this blockOutside ECU connected to lambda before catalyst. |