|
Title: BBKHZ section (and complete CAT heating disable) Post by: masterj on March 27, 2012, 08:24:47 AM Hi, folks! ;)
I started defining BBKHZ section and found that I have two very similar maps, when in other defined maps there's only one. Please open my attached bin and check these addresses: 1D5B6 & 1D610. They look like KFWNWWKA map, but I don;t understand why there are two maps instead of one?? And also, maybe you could check if my defined maps are correct in BBKHZ section: IMLKHTMS @ 15C55 ZKLAMKH @ 15C5E BTRKHTMS @ 1954C CWKHZ @ 19554 DTKATMN @ 19555 DTKH @ 19556 DTMABKH @ 19557 FKHABMN @ 19558 FNSKHLL @ 1955F MLKHMX @ 19564 NLLAD @ 19565 NLLKT @ 19566 TKATMN @ 19567 TKATW @ 19568 TKHABB @ 19569 TKHLLAB @ 1956A TMSLOF @ 1956B ZKHABB @ 1956C KFNFSKHM @ 1D54A KFNLLKHM @ 1D57C KFWNWWKA 1? @ 1D56B KFWNWWKA 2? @ 1D610 KFWNWWKE @ 1D66A KIMLATMNL @ 1D6B8 I feel that there are more maps in my bin in 1DXXX zone. Please help me to find missing ones... Atleast in one of the funktionsrahmen (I believe it is ME7.3.1) are shown also these maps: FKHMD; FTMLAKH; FKHLA; FHOKH; DNKH; TKHLLMX; MLSUS; TKHLL; TKHFSAB; TKHMX Thank you! BTW: At the moment I've set up my maps so (to disable cat heating): IMLKHTMS >> FFs ZKLAMKH >> 00 DTKATMN >> 00 DTKH >> 00 FKHABMN >> 00 MLKHMX >> 00 NLLKT >> 00 TKATMN >> 00 TKATW >> 00 TKHABB >> 00 TKHLLAB >> 00 TMSLOF >> FF ZKHABB >> 00 NFSKHM >> 50s NLLKHM >> 50s Title: Re: BBKHZ section Post by: masterj on March 27, 2012, 09:15:42 AM Also maybe someone knows all the bits configuration of CWKHZ?
What I've found already about it is this: bit 0 > the increased catalyst heating speed after start and after the time TKHLLMX was exceeded can be terminated bit 6 > An abort of the secondary air B slpoff = 1 bit 7 > sets B trkh hard -> no decrease of the sensor heating performance -> sensor may be endangered Another thing: IMLKHTMS (Relative Air Mass Threshold for Changing to Lambda Catalyst Heating). So if we set whole map to FF, this should also disable cat heating or not? And what about BTRKHTMS? If I understand it then it means FAST CAT HEATING. What is that? Then there are maps DTMABKH, FNSKHLL, KFWNWWKA, KFWNWWKE, KIMLATMNL. In both funktionsrahmen files that I have they aren't mentioned at all. Any info on them? Title: Re: BBKHZ section (and complete CAT heating disable) Post by: fknbrkn on August 14, 2014, 05:09:05 PM can someone confirm FKHABMN location in 06A906032HJ 0002
FKHABMN_0_A -> 1BFFE FKHABMN_1_A -> 1BFFF Title: Re: BBKHZ section (and complete CAT heating disable) Post by: ddillenger on August 14, 2014, 07:22:45 PM can someone confirm FKHABMN location in 06A906032HJ 0002 FKHABMN_0_A -> 1BFFE FKHABMN_1_A -> 1BFFF yes. Title: Re: BBKHZ section (and complete CAT heating disable) Post by: nyet on August 14, 2014, 07:45:30 PM crap is this something else that belongs in the wiki
Title: Re: BBKHZ section (and complete CAT heating disable) Post by: fknbrkn on August 15, 2014, 12:43:10 AM yes. (http://4.bp.blogspot.com/-2hxgvwu-VDw/UB9HiSFKvnI/AAAAAAAAKPU/m42_YgmCJOo/s400/Bill+Murray+You%2527re+Awesome.jpg) Title: Re: BBKHZ section (and complete CAT heating disable) Post by: ddillenger on August 15, 2014, 12:59:55 AM crap is this something else that belongs in the wiki Already in there (It has it's own little section below EVAP). Should be merged. |