Print Page - Audi A4 B5 2,7BiTurbo Rally car

Hi to all :)

Just wanted to show my project car, as a factory this was an 2,6l 150HP V6 engine (engine code ABC) with manual gearbox and quattro drive. Then it was swapped with 2,8l 30V (AMX engine code), and after that 2,7 BiTurbo came (AJK).

Car equipped with full rollcage (build within FIA regulations)
Seats with FIA homologation (Sparco)
6 point harnesess with FIA homologation (also Sparco)
Racing steering wheel

Susspension:
BC Racing coilovers (adjustable hight, spring tension and dumping)
All bushings replaced with polyurethane parts.

Breaks:
Front: Audi A6 312mm
Rear Audi A8 269mm

Engine:
2,7 AJK code, running on S4 D-box
Intake cams from 2,8l N/A
Free flow exhaust system

Gearbox:
DWN code originally used in 2,4 30V (already I'm prepering to swap a 6 speed transmission)

Other mods:
Weight reduction
Innovate motorsport AFR gauge
Custom painting

This car is used in rallying, in 2018 I was able to win my local championship in AWD class :)
Unfortunetly in 2019 I had an accident during a rally and body is damaged beyond repair, so I need to start over.... but most of mechanical stuff is still good and will be trasfered to new body:)

I never went with my car to dyno so I don't know what power it made, but it should be around 280HP, only thing I know is that it accelerate from 0 to 100km/h in 5,2s

You can whatch some videos from rally and build videos on my YouTube channel :) I will also try to cover rebuild process on videos.

NefMoto

Vehicles => Project Cars => Topic started by: goblin on February 10, 2020, 05:29:56 AM