|
Title: flashing different software versions Post by: airtite on February 12, 2020, 10:38:27 PM Just need some confirmation.
Is it possible to go from 4D1907558B to 4D1907558F for example? Reading Version Strings... -> Bootrom Version = 06.02 -> EPK = 42/1/ME7.1.1/5/8542.05//25C/Dst01o/160403// -> Contents of ECUID data table: - '0261208051' (SSECUHN) - '1037368087' (SSECUSN) - '4D1907558B ' (VAG part number) - '0002' (VAG sw number) - '4.2l V8/5VT ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004' and flash Reading Version Strings... -> Bootrom Version = 06.02 -> EPK = 42/1/ME7.1.1/5/8542.05//25K/Dst01o/250204/ -> Contents of ECUID data table: - '0261208728' (SSECUHN) - '1037370934' (SSECUSN) - '4D1907558F ' (VAG part number) - '0001' (VAG sw number) - '4.2l V8/5VT ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004' Title: Re: flashing different software versions Post by: airtite on February 14, 2020, 12:22:35 AM so the flash went fine no errors but the car wont start with the above, so in this example I was not able to go from B - F versions.
Title: Re: flashing different software versions Post by: BlackT on February 14, 2020, 01:05:14 AM You must put EEPROM file from that ECU you flashed.
Or try to put virgin EEPROM file Title: Re: flashing different software versions Post by: Detund on March 30, 2020, 12:39:01 AM You should also flash the VIN SKC EEP FROM ONE TO ANOTHER DEVICE
Στάλθηκε από το Redmi Note 6 Pro μου χρησιμοποιώντας Tapatalk |