|
Title: disabled EGT probe from AMK/BAM Post by: eazydaz on March 30, 2012, 04:31:26 AM Please help me, can be disabled EGT probe from AMK/BAM file? Because I can AMK/BAM original file into my Octavia VRS ecu, I have complet setup(tubro,injectors,intake,maf,map..) from AMK/BAM.
Title: Re: disabled EGT probe from AMK/BAM Post by: Vdub-dub on March 30, 2012, 11:08:57 AM copy and paste
EGT If you want to remove your EGT sensors:[20] Note that my old M-box xdf is wrong[21] for CDATR/ATS. Please use these offsets. CDATR (0x18196) - Configuration byte diagnosis exhaust gas temperature regulation CDATS (0x18197) - Configuration byte diagnosis exhaust gas temperature sensor CLAATR - Error class exhaust gas temperature regulation CLAATR2 - Error class exhaust gas temperature regulation bank 2 CLAATS - Error class exhaust gas temperature sensor CLAATS2 - Error class exhaust gas temperature sensor bank 2 There is anecdotal evidence[22] that this will not allow you to completely remove the EGT sensors; keeping dead ones connected might be necessary. Setting both of these to their maximum (1229) may help: [23] TABGSS (0x1C514) and TABGSS2 (0x1C516) - Desired exhaust gas temperature for EGT regulation Title: Re: disabled EGT probe from AMK/BAM Post by: eazydaz on March 30, 2012, 12:05:43 PM And which vallues i have use for these offsets?
|