|
Title: Timing pull ME7.5 Post by: fattyalx on February 20, 2020, 11:11:45 AM Other than knock and IAT, what causes the ECU to pull ignition timing? On a pull my B5 pulls 11.5* of ignition around 3500rpm and slowly tapers back up to 4*, around redline. I dont really see signs of knock in the log. I'll post up a couple logs when I get to my laptop.
B5 1.8t Ebay 57 trim ATP Log Tial 38mm wg 80lb deka injectors(have Bosch I'm gonna swap to) AEB head, AWM block stock motor Mafless(https://uploads.tapatalk-cdn.com/20200220/7203fb0e542c77d9a17f0f004a23be7e.jpg) Sent from my SM-G960U using Tapatalk Title: Re: Timing pull ME7.5 Post by: fknbrkn on February 20, 2020, 11:50:06 AM Boost, fuel, cr
Post the logs Title: Re: Timing pull ME7.5 Post by: nyet on February 20, 2020, 12:58:50 PM lol mafless.
GLHF Title: Re: Timing pull ME7.5 Post by: prj on February 20, 2020, 04:19:03 PM "Pulls ignition"
"Don't see signs of knock" Ok... How about you post a log? Title: Re: Timing pull ME7.5 Post by: fattyalx on February 20, 2020, 10:03:03 PM Heres two 3rd gear pulls, and one running through a couple gears
Title: Re: Timing pull ME7.5 Post by: nyet on February 20, 2020, 10:20:47 PM dude. I don't know where to start.
No, i do, actually. Go back to stock, install a maf, and fire your tuner. Title: Re: Timing pull ME7.5 Post by: nyet on February 20, 2020, 10:25:08 PM More bad news
Title: Re: Timing pull ME7.5 Post by: adam- on February 21, 2020, 01:37:17 AM If she's clinging on just now, she won't be for long.
Title: Re: Timing pull ME7.5 Post by: fknbrkn on February 21, 2020, 01:56:19 AM So you asking why there is a timing pull and didnt even log timing
Title: Re: Timing pull ME7.5 Post by: IamwhoIam on February 21, 2020, 04:29:14 AM Trolling thread?
Title: Re: Timing pull ME7.5 Post by: prj on February 21, 2020, 06:34:34 AM Soon the rod will say HELLO to the outside world ;D
Title: Re: Timing pull ME7.5 Post by: nyet on February 21, 2020, 11:26:53 AM MAFless is faster ... at ejecting rods.
Title: Re: Timing pull ME7.5 Post by: dilly on February 22, 2020, 10:12:57 PM MAFless is faster ... at ejecting rods. his tuner must be a window maker.im no tuner but uh even someone with basic understanding will know why that log graph is properly phocked |