|
Title: STFT limit +/-25% and closed loop PID on MBOX Post by: b16a on February 29, 2020, 03:19:58 AM Hi,
does someone knows where is the stft limit of 25%? also the PID of lambda controller! both for MBOX thanks Title: Re: STFT limit +/-25% and closed loop PID on MBOX Post by: Kompiesto on March 01, 2020, 01:58:18 PM Hi,
I think is FRMAX, FRMINKH, KFFRMIN, FRMINSLS in LRS module. Why you need this? You must setup car without big stft corrections. Title: Re: STFT limit +/-25% and closed loop PID on MBOX Post by: b16a on March 02, 2020, 10:49:00 AM when running big injectors limit of 25% is quite a big step.... also lambda pid of 300cc injector cannot be same as pid of 1750cc injectors.
thanks for the maps, i am checking now!! Title: Re: STFT limit +/-25% and closed loop PID on MBOX Post by: nyet on March 02, 2020, 10:54:27 AM when running big injectors limit of 25% is quite a big step.... also lambda pid of 300cc injector cannot be same as pid of 1750cc injectors. thanks for the maps, i am checking now!! If you are off by more than 25% something is very very wrong, regardless of PID behavior. Title: Re: STFT limit +/-25% and closed loop PID on MBOX Post by: b16a on March 02, 2020, 11:11:42 AM my purpose is to lower the limit as the original 25% is quite high.
when running 1750cc injectors feedback limit of 10% is enough. |