NefMoto

Noob Zone => Noob Questions => Topic started by: Maxohio on March 03, 2020, 03:09:30 PM



Title: Importing Damos in WinOLS ( Map's could not be read )
Post by: Maxohio on March 03, 2020, 03:09:30 PM
Importing Damos in WinOLS ( Map's could not be read )

Currently i'm trying to import an a2l file using WinOLS. The way i'm importing the file is: Project -> Ex & Import -> Import Damos & A2L
After importing, its recognizes the maps, but shows the following error. Am i doing something wrong?

Greetings!



Title: Re: Importing Damos in WinOLS ( Map's could not be read )
Post by: prj on March 03, 2020, 03:21:22 PM
Yes, you are importing an a2l that does not match your binary, or you are importing it with the wrong offset.
That said - you know, EVC support is pretty good if you ask them.


Title: Re: Importing Damos in WinOLS ( Map's could not be read )
Post by: Maxohio on March 03, 2020, 03:31:44 PM
 ::) I dont think they give support on pirates.
The a2l should match the bin, how can i determine what offset to use?


Title: Re: Importing Damos in WinOLS ( Map's could not be read )
Post by: prj on March 03, 2020, 04:03:56 PM
The paid version determines the offset pretty well on it's own.
I haven't used cracked in something like 7 or 8 years...

But you can determine the offset by looking inside the a2l manually, looking at your binary and seeing where things are addressed and where things are.

On C166 variants the extflash where the calibration is, is usually loaded at 0x800000, so that is a good start. But you can see all that from the a2l.


Title: Re: Importing Damos in WinOLS ( Map's could not be read )
Post by: Maxohio on March 04, 2020, 12:08:44 PM
Thanks i've found the solution!  ;D


Title: Re: Importing Damos in WinOLS ( Map's could not be read )
Post by: Bitshifter on March 04, 2020, 03:25:15 PM
Thanks i've found the solution!  ;D

Maybe it coud be helpful for other beginners, if you post your solution. ;)

Remember: you asked for help at the beginning of this theard. ;)


Title: Re: Importing Damos in WinOLS ( Map's could not be read )
Post by: fknbrkn on March 04, 2020, 03:36:24 PM
i bet its a manual offset 800000


Title: Re: Importing Damos in WinOLS ( Map's could not be read )
Post by: Maxohio on March 05, 2020, 11:03:07 AM
You're right :) using an offset of 800000 cleared the problem.