|
Title: Galletto 1260 problem Post by: nautica on April 01, 2012, 11:35:58 AM Hi, I need help. Today I have try to read bin from a car but galletto stuck to "Start data reading..." and nothing happens. Before that I have used it many times and worked well. Any ideas?
(http://s019.radikal.ru/i642/1204/20/1ab3aad59d6c.jpg) Title: Re: Galletto 1260 problem Post by: B4N-m3 on February 15, 2013, 05:05:12 PM good question. happened to me too yesterday. I think it's a cable problem. don't know yet.
If anyone have any idea please help. Title: Re: Galletto 1260 problem Post by: aef on February 16, 2013, 02:54:37 PM car was a mk4 ? aftermarked headunit? maybe it will work if you pull the dash and radio fuse.
worked for me with a S3 Title: Re: Galletto 1260 problem Post by: B4N-m3 on February 18, 2013, 09:50:04 AM mine is an edc15v. tried to pull the dash and radio fuse nothing happens.
Title: Re: Galletto 1260 problem Post by: ddillenger on February 18, 2013, 12:29:47 PM Here is what I've noticed.
If the ecu gives you a second prompt about tension being 13v after you hit connect, you're not connected. If you do nothing to rectify that and click OK it'll hang up on start data reading. When I get that warning, I just close it out and try connecting again. Title: Re: Galletto 1260 problem Post by: mightemouce on February 19, 2013, 09:14:14 AM Ive been having a similar issue lately also I haven't been able to resolve it yet.
Title: Re: Galletto 1260 problem Post by: ddillenger on February 19, 2013, 09:43:25 AM FWIW, I've never been able to get galletto to work in the car. Bootmode on the other hand (on the bench) works every time.
Title: Re: Galletto 1260 problem Post by: Ionut on March 25, 2013, 11:00:40 PM You will never be able to read/write ME7.5 with galletto without boot mode active (puttin pin 24 of 29F400BB chip at ground).
I have same ECU and i can tell you that i`ve tried all possible things. Title: Re: Galletto 1260 problem Post by: AndiS4 on October 07, 2013, 01:35:49 AM May also happen with too high voltage.
With 13volts, Galetto (the eBah one) mostly didnt work proper.. Title: Re: Galletto 1260 problem Post by: overspeed on October 07, 2013, 04:16:59 PM My old galetto worked like a charm in these ECUs... never had to pull any fuse, except in one 2,4 VR6 Golf 2003
Title: Re: Galletto 1260 problem Post by: Ionut on October 18, 2013, 03:25:23 PM galleto is not able to read ecu without boot mode active.
If you want to read it on car, remove dashboard fuse before try anything. |