|
Title: GQ-4x4/Chip burning on board Post by: DadJorts on April 06, 2020, 12:45:00 PM Mainly pertaining to 95040 eeproms (06a906032lp/lq/cl/hs ecu pn's), is there some small detail i seem to be missing that is not allowing modified data to be written back utilizing an eeprom burner with the ic on board with a soic8 clip? Tied write enable line high, as well as low as per datasheet, to no avail. Immo off'd lots of these prior, and even within the session two ECM's wrote fine, so i do not suspect the tooling. Any help appreciated
Title: Re: GQ-4x4/Chip burning on board Post by: DadJorts on April 06, 2020, 12:47:00 PM Mainly pertaining to 95040 eeproms (06a906032lp/lq/cl/hs ecu pn's), is there some small detail i seem to be missing that is not allowing modified data to be written back utilizing an eeprom burner with the ic on board with a soic8 clip? Tied write enable line high, as well as low as per datasheet, to no avail. Immo off'd lots of these prior, and even within the session two ECM's wrote fine, so i do not suspect the tooling. Any help appreciated POSTED IN WRONG SECTION PLEASE REMOVE |