NefMoto

Noob Zone => Noob Questions => Topic started by: Gottatune on April 10, 2020, 06:52:53 AM



Title: MK5 golf gti dsg. bigger inlet - check over.
Post by: Gottatune on April 10, 2020, 06:52:53 AM
Hello everyone I've been playing around with my stage 2 golf mk5 gti BWA - MED9

I have a few questions - how does my tune look as prespective ( also has launch control ) did try removing cold start but not managed that so well.

What is everyone using for logs?? I cant find anything at all on logging med9 ecu other then people wishing life was easy again with me7logger :')



Title: Re: MK5 golf gti dsg. bigger inlet - check over.
Post by: nyet on April 10, 2020, 09:18:58 AM
Moved, since it doesn't have a log :(

VCDS is almost sufficient for MED9 for most things.


Title: Re: MK5 golf gti dsg. bigger inlet - check over.
Post by: Gottatune on April 10, 2020, 09:26:18 AM
That's fair enough, thanks for answering that. Ill have purchase another ross tech geunie cable or find a used one seeming my ex missus now cut all my cables up. Only just replaced my mpps and only have a vcds clone atm just so could read codes.


Title: Re: MK5 golf gti dsg. bigger inlet - check over.
Post by: Josh_ox3 on April 17, 2020, 02:42:10 PM
Hello everyone I've been playing around with my stage 2 golf mk5 gti BWA - MED9

I have a few questions - how does my tune look as prespective ( also has launch control ) did try removing cold start but not managed that so well.

What is everyone using for logs?? I cant find anything at all on logging med9 ecu other then people wishing life was easy again with me7logger :')



Did you log it with this setup?

Interesting to see the outcome