|
Title: CW_CAN_R ABS & Airbag missing Post by: domdomt on May 03, 2020, 06:30:33 AM Hi
Completed an engine swap on a Spitfire & used a 1.8t Passat engine (AWT). Thanks to this forum I have de-immob the ECU & disabled function of SAI, N80, Rear Lambda & n249 thru ESKONF. Next mission is to attempt to remove: P1523 - Crash signal from Airbag controller P1649 - missing message from ABS controller From what I have read, the most sensible to do this is by editing the CW_CAN_R, but I am unable to find it. Could someone please point me in the right direction? Thank you Title: Re: CW_CAN_R ABS & Airbag missing Post by: Auriaka on May 03, 2020, 07:49:35 AM Can_R block starts at 13cec..
13cec, 13cee, 13cf0,13cf2...... on your file. Knowing that you can use a comparison to find the rest of the CAN stuff. Title: Re: CW_CAN_R ABS & Airbag missing Post by: BlackT on May 04, 2020, 12:17:13 AM CWCS=0 to disable airbag DTC
For ABS code it via VCDS to xx0xx Title: Re: CW_CAN_R ABS & Airbag missing Post by: Auriaka on May 04, 2020, 07:24:17 AM I knew about cwc but I overlooked VCDS. Thank you for that
|