|
Title: Audi A4b6 2.0ALT ME7.5 CVT to manual gearbox swap Post by: Technoman on May 31, 2020, 03:43:58 AM Hi friends! Has Audi A4b6 2.0ALT ME7.5 CVT swapped to manual gearbox, its needs also change ECU VAG-COM coding from 11581 ro 11501 for attempt manual gearbox complectation, but ECU not apply 11501 coding and stay 11581 without changes. Anybody help me with edit transmission configuration for manual gearbox in stock full flash (Ktag readed) or other variants?
HW: 0261207754 SW: 1037363476 Engine: 2.0L R4/5VS HW Ver.: SW upg.: 8E0909557E 0003 Title: Re: Audi A4b6 2.0ALT ME7.5 CVT to manual gearbox swap Post by: Stoti on May 31, 2020, 12:21:33 PM U will have to flash this ecu with manual flash. tomorow i can make dump for u if u wish . I think u have to change eeprom data too but im not sure . Also prepare sticker from the back of the spare tyre to get login code for abs module it also must be recoded.
Title: Re: Audi A4b6 2.0ALT ME7.5 CVT to manual gearbox swap Post by: Technoman on May 31, 2020, 10:28:11 PM Thanks! I will change ABS and instrument cluster variant koding (i know login offcourse) - its ok, only ecu not accept manual trans. coding (11581 to 11501). And i think i need reflash ECU to MT software as you say.
Title: Re: Audi A4b6 2.0ALT ME7.5 CVT to manual gearbox swap Post by: Stoti on June 01, 2020, 08:59:21 AM here upload this . readed by obd
Title: Re: Audi A4b6 2.0ALT ME7.5 CVT to manual gearbox swap Post by: Technoman on June 01, 2020, 09:19:12 AM Thank you! The file is readed via OBD whithout boot-pin?
Title: Re: Audi A4b6 2.0ALT ME7.5 CVT to manual gearbox swap Post by: Stoti on June 01, 2020, 11:19:50 AM Yes . if u have immo u will have to flash it via boot .
|