|
Title: Need help with not Connecting to any ECU Post by: Steven97i1 on June 06, 2020, 01:27:43 PM Hey i tried it with 3 different FDTI cables, my Rosstech knock off wont work!
5 Differnet ecus Im trying for 5 Days but my only succes is: KWP1281 connect info: 06A906019BF 1.6l R4/2V SIMOS HS2439 but after SImos in has some weird things in it. I tried it in car and on bench! in VCDS i can connect to all Ecus on the bench! There are 2 Ecus infront of me! 06A 906 019BF Siemens and Magneti marelli IAW4AV.VA "Starting loading of info. Cancelling loading of info. Validated FTDI device is in dumb mode. Disconnected Connecting... Starting slow init connection. Connecting to address 0x01. Slow init succeeded. Switching to KWP1281 session. KWP1281 connect info: 06A906019BF 1.6l R4/2V SIMOS HS2439" Title: Re: Need help with not Connecting to any ECU Post by: fknbrkn on June 06, 2020, 02:41:37 PM Nef works only with me7 Title: Re: Need help with not Connecting to any ECU Post by: Steven97i1 on June 07, 2020, 01:33:23 PM And how do everybody get there .bin from the Marelli Magnetti ?
Title: Re: Need help with not Connecting to any ECU Post by: _nameless on June 08, 2020, 04:39:02 AM And how do everybody get there .bin from the Marelli Magnetti ? Wow, you must be retarded.Title: Re: Need help with not Connecting to any ECU Post by: Sandstorm3k on June 08, 2020, 05:37:31 AM And how do everybody get there .bin from the Marelli Magnetti ? I believe Kess/KTag hardware does this. |