|
Title: The problem with the load and temperature on the k04 turbo Post by: aleks19411 on June 10, 2020, 01:24:49 PM I greet everyone! A4 car, TT nozzles, k04 turbo, downpipe, ecology turned off. The problem is this: When setting up on our dyno stand, everything was normal, and when driving on the road, retards appear and the car does not pull as I would like. Unfortunately, the log files do not left. Here I am attaching a file and a definition file to it.
OK! since this topic does not bear an important point in the opinion of nyet, then I think I’ll figure it out myself! Title: Re: The problem with the load and temperature on the k04 turbo Post by: nyet on June 10, 2020, 01:36:13 PM Post logs.
Title: Re: The problem with the load and temperature on the k04 turbo Post by: aleks19411 on June 10, 2020, 01:38:12 PM Post logs. unfortunately there are no more .. there are measurement graphs when setting upTitle: Re: The problem with the load and temperature on the k04 turbo Post by: aleks19411 on June 10, 2020, 01:43:26 PM Title: Re: The problem with the load and temperature on the k04 turbo Post by: nyet on June 10, 2020, 01:44:50 PM ME7L please, VCDS is worthless on these ECUs
Title: Re: The problem with the load and temperature on the k04 turbo Post by: aleks19411 on June 10, 2020, 01:46:16 PM Post logs. but this log file when setting up on a dyno stand with cooling to 30C Title: Re: The problem with the load and temperature on the k04 turbo Post by: nyet on June 10, 2020, 01:48:12 PM So what?
Title: Re: The problem with the load and temperature on the k04 turbo Post by: aleks19411 on June 10, 2020, 01:50:52 PM So what? ok, try to do it on me7loggerTitle: Re: The problem with the load and temperature on the k04 turbo Post by: BlackT on June 10, 2020, 02:13:24 PM K04 and only 225 HP?
Title: Re: The problem with the load and temperature on the k04 turbo Post by: aleks19411 on June 10, 2020, 02:16:49 PM K04 and only 225 HP? yes customer request - no more than thatTitle: Re: The problem with the load and temperature on the k04 turbo Post by: aleks19411 on June 10, 2020, 02:28:52 PM ME7L please, VCDS is worthless on these ECUs is it such an opinion because you cannot use it? or principle forum rules? Title: Re: The problem with the load and temperature on the k04 turbo Post by: nyet on June 10, 2020, 03:01:24 PM is it such an opinion because you cannot use it? or principle forum rules? VCDS is useless for tuning because it provides almost no useful data and the same rate is completely worthless Title: Re: The problem with the load and temperature on the k04 turbo Post by: BlackT on June 10, 2020, 03:35:49 PM Can you post your KFZW map?
Title: Re: The problem with the load and temperature on the k04 turbo Post by: adam- on June 10, 2020, 11:40:54 PM and when driving on the road, retards appear I fucking love this. Title: Re: The problem with the load and temperature on the k04 turbo Post by: contrast on June 11, 2020, 01:29:08 AM |