|
Title: 1,8T MAP sensor size and higher pressure Post by: nupustas on June 11, 2020, 10:56:10 AM Hi, in my new project(1,8T, ME 7.5, AMK software) i instaled 18mm sensor (2,5bar), 0281002177 oem code (because of hole diameter in intercooler), software in stock car works with 12mm map sensor(2,5bar) 0261230073. Now ecu shows 1,9bar(ant follows ldrxn almost perfect), but real pressure about 1,3-1,5bar(or absolute 2,3-2,5bar), that means about 0,5-0,6bar higher. Tested with 3 mechanical gauges. On idle, shows 1000mbar. Maybe someone know if these sensors are really different or just different in shape?
Title: Re: 1,8T MAP sensor size and higher pressure Post by: nyet on June 11, 2020, 10:59:31 AM You will need to find the datasheet for either, or the stock bins that go with each and compare DLSOFS etc.
Title: Re: 1,8T MAP sensor size and higher pressure Post by: gremlin on June 11, 2020, 01:07:40 PM Maybe someone know if these sensors are really different or just different in shape? 0281002177 ( 038906051) and 0261230073 (038906051D) sensors are identical in electrical characteristics.Title: Re: 1,8T MAP sensor size and higher pressure Post by: nupustas on June 11, 2020, 07:53:37 PM Thanks. Maybe just faulty sensor... I will try to replace.
Title: Re: 1,8T MAP sensor size and higher pressure Post by: _nameless on June 11, 2020, 08:28:16 PM Thanks. Maybe just faulty sensor... I will try to replace. so much china junk fakes floating around. be sure you get your replacement from a good supplier |