|
Title: MED 9.1 rear o2 sensor. Post by: razor1199 on June 13, 2020, 04:08:49 AM Hello, I'm fighting with P0036 - Oxygen (Lambda) Sensor B1 S2: Heating Circuit: Malfunction / Open Circuit
I'm running with DP 3". What I've tried but not work: $1E148A - CLAHSH set to 0 $1E148B - CLAHSHE set to 0 $1DD64E - CDLASH set to 0 $1DD656 - CDLSH set to 0 None of them works. I think this is bad adresses, I tried to compare my bin to golf 5 gti damos, but I can't figure out which addresses it should be. May somebody help me with find it? Here is my bin: Title: Re: MED 9.1 rear o2 sensor. Post by: BlackT on June 13, 2020, 04:29:33 AM ESKONF (ME7) is for remowe hardware DTC
Title: Re: MED 9.1 rear o2 sensor. Post by: razor1199 on June 13, 2020, 04:45:48 AM ESKONF (ME7) is for remowe hardware DTC As far as I know MED 9.1 doesn't have ESKONF. ???Title: Re: MED 9.1 rear o2 sensor. Post by: Dave9n3 on June 13, 2020, 01:52:34 PM Try CDKATSP
Title: Re: MED 9.1 rear o2 sensor. Post by: gremlin on June 14, 2020, 05:42:03 AM May somebody help me with find it? Set addr $1D63B8 = 0 Title: Re: MED 9.1 rear o2 sensor. Post by: razor1199 on June 14, 2020, 12:21:24 PM Try CDKATSP Set addr $1D63B8 = 0 Thank you guys. I have put 0 in CDKATSP ($1DD64A) and CWPSHSHE ($1D63B8). Also modified CLRSHK ($1D66F4) to 51. I rode for 100KM, DTC heater didn't come back :D! Now I have next DTC (ehhh), P0140 - Oxygen (Lambda) Sensor B1 S2: No Activity. I think I should manage to change something more like: - CWKONABG = 0 - CWKONLS = 1 - CLAKAT = 0 - CDLATV = 0 Should it be enough to remove DTC's or I have to look something more? Regards! |