|
Title: me7.5 boot mode mpps tricore boot Post by: horon6155 on June 16, 2020, 03:13:05 PM hello guys, i have a problem again.
we actually bought an audi tt ajq motpr. heyte has determined that an auq control unit was installed, but the software is from an ajq. so with mpps I played oiriganl software from ajq. and now nothing works. I tried to put the old one back on, but mpps always says "ecu Programming mode" and when I try to read or write it says "invalid key". I tried to write and read with Tricore boot. I inserted all pins and also the connection to the memory. unfortunately the program searches the ecu but finds nothing. 14v voltage is available. am desperate. Title: Re: me7.5 boot mode mpps tricore boot Post by: d3irb on June 16, 2020, 03:37:07 PM why are you trying to use tricore on a non tricore ECU? you want "generic bosch me7.xx" in MPPS, or use galletto. no tricore involved anywhere near me7.
Title: Re: me7.5 boot mode mpps tricore boot Post by: horon6155 on June 16, 2020, 03:43:40 PM oh that's the problem: D. can i use galetto with the mpps interface? or can I do boot mode with the mpps?
Title: Re: me7.5 boot mode mpps tricore boot Post by: Blazius on June 16, 2020, 04:29:37 PM Im fairly sure you cant use mpps cable with galletto as galleto program is hardcoded to detect the ftdi cable serial etc. Maybe with some trickery but why ? MPPS can do bootmode yes. Generic ME7 bootmode.
Title: Re: me7.5 boot mode mpps tricore boot Post by: horon6155 on June 20, 2020, 02:49:48 AM I got it done with mpps. but i would like to buy a galletto interface now. what would you recommend me there? i found one for galletto 2 master. which is the latest? what could you possibly use to read and flash annual types of control units?
|