|
Title: 8n1920980E Audi TT mk1 1.8t DSG swap. Post by: Sendoff74 on July 03, 2020, 01:01:45 PM Hi.
I did dsg swap on 1.8t mk 1 quattro TT. But now my speedometer doesn't work. As far as I know, that's because dsg has no analog speed sensor...And it uses signal that comes via CAN. The question is, if it is possible to recode/edit EEPROM of my instrument cluster, to make it get signal via CAN. Title: Re: 8n1920980E Audi TT mk1 1.8t DSG swap. Post by: Sendoff74 on July 03, 2020, 01:02:37 PM The instrument cluster is Magnetic Marelli M73 D14
Title: Re: 8n1920980E Audi TT mk1 1.8t DSG swap. Post by: macxxx on July 03, 2020, 03:03:54 PM There is no option for changing cluster eprom to read speed from CAN - you can try to connect analog output from ABS/ESP to cluster or create some sort of can/analog connverter
Title: Re: 8n1920980E Audi TT mk1 1.8t DSG swap. Post by: mastaro on May 30, 2021, 03:22:29 PM Hi. I made that change too. you have to change the mechatronics for a golf 5. everything works apart from the reverse light.I did dsg swap on 1.8t mk 1 quattro TT. But now my speedometer doesn't work. As far as I know, that's because dsg has no analog speed sensor...And it uses signal that comes via CAN. The question is, if it is possible to recode/edit EEPROM of my instrument cluster, to make it get signal via CAN. Title: Re: 8n1920980E Audi TT mk1 1.8t DSG swap. Post by: dal on May 31, 2021, 05:56:11 AM Use an Arduino Nano and MCP2515 to get VSS from CANbus, and then generate an signal to the cluster.
you can try to connect analog output from ABS/ESP to cluster On my A3 I was not able to find this output on the ABS module. On the wiring diagram, I found the possible pin, that on some cars goes to navigation system, but on my car, there is no output. Title: Re: 8n1920980E Audi TT mk1 1.8t DSG swap. Post by: mastaro on June 04, 2021, 02:42:22 PM it comes out of the gearbox but you have to change hardware, your hw does not give a speed signal. your hw from vsignal via can
Title: Re: 8n1920980E Audi TT mk1 1.8t DSG swap. Post by: Audi225bam on August 20, 2023, 01:01:38 PM Hi. hi mate how and with what box please? I did dsg swap on 1.8t mk 1 quattro TT. But now my speedometer doesn't work. As far as I know, that's because dsg has no analog speed sensor...And it uses signal that comes via CAN. The question is, if it is possible to recode/edit EEPROM of my instrument cluster, to make it get signal via CAN. |