|
Title: Retain immobilizer functionality (IMMO 2/3) Post by: Sandstorm3k on July 04, 2020, 10:11:02 AM Another probably dumb question. I've ofc found the guides to immo off but i don't think this is the way it should be done.
Now I've got two ECU's. One immo 3, one immo 2. And i was thinking one of two things. I could either see if i could code it in using vcds (genuine). Or could i flash over the EEPROM. I prefer not resorting to immo off. I did have problems with my own rig getting the software to work but thats an issue for later. |