|
Title: Me7 ecu pins Post by: Slowgti on July 05, 2020, 02:09:33 PM Does anyone have an amp or te part number for the small ecu harness pins? I found some data sheets for the connectors, but I couldn’t find a pin in the catalog that matched the hand full of pins I have.
Thank you! Title: Re: Me7 ecu pins Post by: justinvw2646 on July 09, 2020, 03:49:50 PM With the part number on the connector housing you can call any dealer and get the terminal end part numbers.....make sure you know what wire diameter you need (most of them are .5mm) but sometimes a connector like that will have multiple wire diameters with the same ends. If that makes sense.
Title: Re: Me7 ecu pins Post by: Blazius on July 09, 2020, 03:59:15 PM should be jpt 2.8 , or something along those lines.
|