|
Title: please could i have some help with Eskonf ? Post by: Maddog82 on July 09, 2020, 01:01:06 PM hi to all
I'm struggling with this narrowband ECU (06A906032AR) to make sense of how to remove SAI, EVAP, and N249. Ive looked on the S4 wiki but i cant understand as its different in the file to what ive altered before on HJ and HN Bins, so is there anyone who would be able to help me out, please? Bin is attached many thanks in advance Title: Re: please could i have some help with Eskonf ? Post by: justinvw2646 on July 09, 2020, 03:37:56 PM I will take a look when I get home tonight, but removal of the N249 is a bad idea. http://nefariousmotorsports.com/forum/index.php?topic=3828.0
Take note of who is giving the guy a hard time....those guys know their stuff, if it didn’t matter they would say so....fwiw Title: Re: please could i have some help with Eskonf ? Post by: Maddog82 on July 09, 2020, 03:48:11 PM many thanks, :)
Title: Re: please could i have some help with Eskonf ? Post by: justinvw2646 on July 09, 2020, 04:32:06 PM a screenshot of the output from me7eskonf....I renamed your file ori because you have to specify the bin in command prompt, but the screenshot is indeed from the bin you posted.
Title: Re: please could i have some help with Eskonf ? Post by: justinvw2646 on July 09, 2020, 04:44:46 PM It gives you two addresses so you will have to determine which is correct based on factory installed equipment. One difference I noticed was "BKV". If you DO NOT have an electric brake vacuum pump (manual transmission) the upper address in the screenshot will be correct for your bin. If you HAVE an electric brake vacuum pump (automatic transmission) the lower address in the screenshot will be correct for your bin. Hope this helps.
Title: Re: please could i have some help with Eskonf ? Post by: Maddog82 on July 10, 2020, 01:43:26 AM Thats super. Thank you very much
|