|
Title: Help needed ecu swap Audi A4 b8 Med17.5 Post by: Melch700 on July 10, 2020, 02:31:33 AM I want to swap my 120 HP ecu to the 160 HP ecu. i tried to read the pin codes so i could do the swap with VCDS . but the codes provide by carlabimmo won't work.
Tried to immo off the 160HP ecu but that didn't work also. ECU will not respond anymore. When i read back the orginal files the 160HP will work but only cranks and will not start. what are the options. does anybody can point me in the right way. i have the Eeprom files readed from both ECU's with fgtech galletto. Title: Re: Help needed ecu swap Audi A4 b8 Med17.5 Post by: macxxx on July 11, 2020, 04:48:01 AM Pins wont help too much its a newer generation of immo - you need to transfer cs bytes , mac and pin from one ecu to another
Title: Re: Help needed ecu swap Audi A4 b8 Med17.5 Post by: Melch700 on July 11, 2020, 12:23:17 PM Pins wont help too much its a newer generation of immo - you need to transfer cs bytes , mac and pin from one ecu to another Thanks , what are the best options. cloud it been done by software are do i need some extra hardware. Title: Re: Help needed ecu swap Audi A4 b8 Med17.5 Post by: razor1199 on July 12, 2020, 12:58:10 AM You need something like AVDI, SMOK.
Or put somewhre eeprom of both ecus and ask someone to prepare a proper dump :) |