|
Title: Anyone used BMW IMPA cable for flashing with Nefmoto ecuflasher? Post by: Mendizalea on July 21, 2020, 03:34:27 AM Tryed to flash my TT APX ecu (ME7.1 I think ) using bmw impa cable but Nefmoto Ecuflasher does not recognize cable.
I use the same cable with ME7loger to make logs and goes perfec. This is normal? Anyone used wiht bmw impa cable using Nefmoto Ecuflasher with success? Do i need to buy Mpps cable to flash? Thanks in advance. Title: Re: Anyone used BMW IMPA cable for flashing with Nefmoto ecuflasher? Post by: nyet on July 21, 2020, 10:35:29 AM Nef flasher requires an FTDI based cable. This is explicitly mentioned throughout the documentation, readmes, and the various FAQs here.
Title: Re: Anyone used BMW IMPA cable for flashing with Nefmoto ecuflasher? Post by: Pyromaniak on August 09, 2020, 11:36:25 PM Guys, what is neff moto flasher? Where ican get him? How much cost? And what device use?
Thanks Title: Re: Anyone used BMW IMPA cable for flashing with Nefmoto ecuflasher? Post by: Pyromaniak on August 09, 2020, 11:38:13 PM Nef flasher requires an FTDI based cable. This is explicitly mentioned throughout the documentation, readmes, and the various FAQs here. Inpa kabel, is probably old kkl kable (vag409) ftdi based. Title: Re: Anyone used BMW IMPA cable for flashing with Nefmoto ecuflasher? Post by: nyet on August 09, 2020, 11:52:35 PM http://nefariousmotorsports.com/forum/index.php?topic=12861.0title=
Title: Re: Anyone used BMW IMPA cable for flashing with Nefmoto ecuflasher? Post by: prj on August 10, 2020, 12:02:37 AM K+DCAN works and they're all FTDI.
Title: Re: Anyone used BMW IMPA cable for flashing with Nefmoto ecuflasher? Post by: diggy79 on August 28, 2020, 03:40:44 PM can you use those K+DCAN IMPA cables with FTDI Stated above for boot mode to do Immo off.?
Using the DOS based Argdub's programs? I'm trying to confirm my setup, as i have done some A6 2.7T ECUs in boot mode couple years ago, and can't remember which cable i used. I'm having a hell of time getting a 01 A6 4.2L ECU with ME7.1.1 in boot mode on the bench to remove Immo. Thanks Title: Re: Anyone used BMW IMPA cable for flashing with Nefmoto ecuflasher? Post by: Auriaka on August 28, 2020, 11:59:31 PM I use a r232 INPA cable for boot immo and for nef flash. Does not work with galeto.
Just need to.find the com port its riding on and syntax it approprietly |