|
Title: AUDI S3 8N0906018BH 0001 req lambda 0.68 Post by: BlackT on August 07, 2020, 04:12:42 PM Audi S3, more or less stock hardware,tuned to aprox 250-260 HP, don't have EGT sensor in orignal as I can see
Problem is in one moment req lambda go really low, and I can't figure why? Calculed EGT are under 800 C° There is no knock IAT is under 40 C° Only thing i dissable is CAT control beacuse car don't have it What can cause this, this is first time I see so low req lambda After looking in FR i assume ATR is problem, will log today and see what is happening Title: Re: AUDI S3 8N0906018BH 0001 req lambda 0.68 Post by: BlackT on August 08, 2020, 08:51:35 AM CATR was problem, I zero it and now it follow LAMFA,
But there is other thing strange on this car Intake temp over 50° Fuel 100 RON Boost 1.2 bar at 6000 RPM Ignition angle 22° And there is no knock? How is that possible? |