|
Title: Wiring lc-2 and dg-1 Post by: B.B.B5/S4 on August 29, 2020, 07:28:49 PM Hopefully posting this to the right place... Wondering if there's anyone that can help me out with a quick breakdown of wiring wideband O2 sensors into factory harness so ECU is reading data I've seen a couple with single sensors wired in using yellow analog output wire but unless I'm missing something that's only half the battle being the other bank will not have input I know there's a secondary output of the brown wire but from my reading it looks like the voltage range and input is scaled differently thanks in advance
Sent from my Pixel 4 using Tapatalk Sent from my Pixel 4 using Tapatalk Title: Re: Wiring lc-2 and dg-1 Post by: nyet on August 29, 2020, 08:59:23 PM Please stop posting the same post over and over again to multiple boards.
Title: Re: Wiring lc-2 and dg-1 Post by: dilly on September 01, 2020, 12:26:36 AM a quick google search will solve this question for you. there is a thread that explains which plug on the rear o2 sensors your use and which wire it is. then further explains the address you log with the respective conversion of each brand wideband sensor to lambda or afr.
don't be a nuisance. seems you have been warned multiple times. i would relax if i were you |