|
Title: 8E0909518AA 0004 logs after tune Post by: zax on September 04, 2020, 02:01:12 PM Hello!
After a year of experiments I have finally made a satisfying tune for my A3 and it's time for the A4 B6. It's a BFB engine. I've removed catalytic converter, changed the turbo for a hybrid, so it can hold the boost at higher RPMs, and replaced injectors from 06B133551M to 06A906031BA so they have a 320cc. There is a log with original soft and my modified one. With full boost I hear the knocking, and it's still not the power, that I expect. But there is no errors written, and engine is still using the map without continuos knock. Can you take a look at these logs? I'm using ECUxPLOT, and all seems right. If you need other chanels, please tell me, I'll do the additional logs. Title: Re: 8E0909518AA 0004 logs after tune Post by: Blazius on September 04, 2020, 02:19:56 PM Use Me7logger.
Title: Re: 8E0909518AA 0004 logs after tune Post by: zax on September 04, 2020, 02:22:46 PM Use Me7logger. Ok, after weekend I'll get the other cable, and do the right log. But you can't see anything from this logs? Title: Re: 8E0909518AA 0004 logs after tune Post by: Blazius on September 04, 2020, 03:04:45 PM Ok, after weekend I'll get the other cable, and do the right log. But you can't see anything from this logs? Cant see much from that log its useless, you dont have enough variables and VCDS is too slow for any decent logging. If you have an FTDI chipped cable just install the VCP drivers and it should work with me7logger, if not get any kind of blue cable even ch340 is fine to log. Title: Re: 8E0909518AA 0004 logs after tune Post by: nyet on September 04, 2020, 04:44:29 PM Please obey forum rules. Moved to noob forum.
I normally delete posts like this. http://nefariousmotorsports.com/forum/index.php?topic=4094.0title= |