|
Title: STFT temperature treshold Post by: curamrdan on October 23, 2020, 04:18:56 PM Which map in MED9/17 (or atleast ME7) can i edit to change teperature treshold for closedloop lambda control - STFT?
And also i did not find any maximum/minimum of STFT allowed correction, tried change all FRAxx MN+MX values , still getting up to +-25% Im playing with dual bank engine, with lambda sensors in one pipe due turbo, so want to try little nubm negative correction in warm up phase as bandaid. Title: Re: STFT temperature treshold Post by: noice on October 24, 2020, 04:42:30 AM Which map in MED9/17 (or atleast ME7) can i edit to change teperature treshold for closedloop lambda control - STFT? Two independent control systems trying to control a single plant. Nothing good will come from this...And also i did not find any maximum/minimum of STFT allowed correction, tried change all FRAxx MN+MX values , still getting up to +-25% Im playing with dual bank engine, with lambda sensors in one pipe due turbo, so want to try little nubm negative correction in warm up phase as bandaid. Title: Re: STFT temperature treshold Post by: curamrdan on October 24, 2020, 02:30:56 PM If you have any solution for me, let me know. I still with search for a protuner who are willing to bother as job, with my custom project, so till now its all on me.
Im still after answers. Title: Re: STFT temperature treshold Post by: BlackT on October 24, 2020, 02:45:52 PM KFFRMIN
Title: Re: STFT temperature treshold Post by: curamrdan on October 26, 2020, 09:14:42 AM Thank you, works for what i need :)
|