|
Title: me7.5 motherboard wiring diagram need Post by: tao13 on October 29, 2020, 11:25:06 AM Hi all. Somebody had a me7.5 motherboard wiring diagram need?
I burned my ecu (not feel the throttle) because i used the ground from lambda 2 sensor( this sensor is disabled) for an afr controller. After this the ecu goes up and down the rpm and after 3 starts keep the idle rpm at 2000 and acceleration pedal not feeled. Thanks in advance Title: Re: me7.5 motherboard wiring diagram need Post by: timus on October 30, 2020, 03:15:39 AM Here: http://nefariousmotorsports.com/forum/index.php?topic=15101.0title= (http://nefariousmotorsports.com/forum/index.php?topic=15101.0title=).
Its for two version c2-2 and c3. Maybe it will match your ecu. Title: Re: me7.5 motherboard wiring diagram need Post by: gremlin on October 30, 2020, 03:52:05 AM After this the ecu goes up and down the rpm and after 3 starts keep the idle rpm at 2000 and acceleration pedal not feeled. Most likely the 80-pin ASIC chip is damaged. Title: Re: me7.5 motherboard wiring diagram need Post by: tao13 on October 31, 2020, 05:36:44 AM THANKS a lot to both!
|