|
Title: How does Me3.8.2/3.8.3/5.9.2 compute fuel? Post by: ricekikr on April 27, 2012, 06:18:36 AM How does Me3.8.2/3.8.3/5.9.2 compute fuel?
I could only find (what looks like) part throttle map. (3.8.2 - 92b4 / 5.9.2 - 9510). It looks like it's only a correction map. (Values - 128) Title: Re: How does Me3.8.2/3.8.3/5.9.2 compute fuel? Post by: RS-MAD on April 29, 2012, 01:57:36 AM Me3.8 compute fuel just like ME7 , you have conversion from main load that is MAF , then it convert with formula fuel in ms that is need for 14,7:1 lambda.Then apply all of corrections .
You have always calculation for Lambda 1 in load ms. Title: Re: How does Me3.8.2/3.8.3/5.9.2 compute fuel? Post by: ricekikr on May 01, 2012, 10:44:23 AM Thanks for the info :)
Title: Re: How does Me3.8.2/3.8.3/5.9.2 compute fuel? Post by: Roader55 on July 20, 2013, 10:02:28 AM hello,i dont wont to start new topic so i ask here
This ecu calculate fuel from MAF map,withc are the abreviatures in damos for the fuel maps and corrections? what i need to change if i wont to open the injectors more? thank you Title: Re: How does Me3.8.2/3.8.3/5.9.2 compute fuel? Post by: hammersword on July 22, 2013, 09:01:17 AM MAF + throttle angle!
Title: Re: How does Me3.8.2/3.8.3/5.9.2 compute fuel? Post by: prj on July 22, 2013, 09:14:13 AM Throttle angle (alpha-n) is used in case of defective MAF. In normal operation it is used for wall film model, everything else is MAF based.
Title: Re: How does Me3.8.2/3.8.3/5.9.2 compute fuel? Post by: Roader55 on July 24, 2013, 02:40:29 AM ok,witch map is the MAF map?and how i need to correct it to inject more fuel?
Title: Re: How does Me3.8.2/3.8.3/5.9.2 compute fuel? Post by: Roader55 on August 04, 2013, 05:54:43 AM no one can tell how to make ecu inject more fuel?
|