|
Title: ECU cloning Audi TT 8J 3.2 Post by: wersu on November 25, 2020, 01:22:48 PM Hello,
i want to clone the ecu... the second Ecu should work for testing tuning files. my original is 022 906 032 HE HW: 022 906 032 GP 0261 201 227 (updated to 022906032LA) and the second ECU is 022 906 032 LA HW : 022 906 032 GP 0261 0201 868 ME 7.1.1 what i have to do ? read flash , eep ? and proc ? to read only from original over obd possible ? i have kess, ktag ,mpps ,vagdash can , svci2018 clones... thanks for helping... Title: Re: ECU cloning Audi TT 8J 3.2 Post by: A332Q on February 11, 2021, 01:31:46 AM Both have the same software installed, so only copie the eeprom for vehicle immo data.
Title: Re: ECU cloning Audi TT 8J 3.2 Post by: bamofo on February 11, 2021, 01:03:49 PM Hello, i want to clone the ecu... the second Ecu should work for testing tuning files. my original is 022 906 032 HE HW: 022 906 032 GP 0261 201 227 (updated to 022906032LA) and the second ECU is 022 906 032 LA HW : 022 906 032 GP 0261 0201 868 ME 7.1.1 what i have to do ? read flash , eep ? and proc ? to read only from original over obd possible ? i have kess, ktag ,mpps ,vagdash can , svci2018 clones... thanks for helping... If you want to clone, yes take all three pieces, read in boot mode. Write to new one and you have a clone for sure. If its the same software or newer revision just moving the EEPROM will fix it. |