|
Title: ME7.5.10 Post by: xXxCryxXx on December 04, 2020, 06:17:42 PM Hello together,
im looking for CWSAWE for my Lupo 1.0L AUC Engine, i was trying pops and bangs just for fun... Ignition time works fine and lambda req Can someone give me the adress where CWSAWE is? Thanks a lot! Title: Re: ME7.5.10 Post by: _nameless on December 04, 2020, 07:15:33 PM wheres the file?
Title: Re: ME7.5.10 Post by: xXxCryxXx on December 05, 2020, 07:56:35 AM Title: Re: ME7.5.10 Post by: gremlin on December 05, 2020, 08:10:48 AM Can someone give me the adress where CWSAWE is?
[/quote] $15601 Title: Re: ME7.5.10 Post by: xXxCryxXx on January 07, 2021, 06:15:22 AM Can someone give me the adress where CWSAWE is? $15601 Hey mate, today i try to set the value to 1 but the car is still cut off the fuel ... :( maybe a other adress ? Title: Re: ME7.5.10 Post by: gremlin on January 07, 2021, 07:19:21 AM Hey mate, today i try to set the value to 1 but the car is still cut off the fuel ... :( maybe a other adress ? Address is 100% exact. You haven't changed anything. CWSAVE is already set to 1 in your stock original file Title: Re: Re: ME7.5.10 Post by: xXxCryxXx on January 07, 2021, 07:20:40 AM Address is 100% exact. Do you have a other Option for Stop of fuel cut off? You haven't changed anything. CWSAVE is already set to 1 in your stock original file X-Boost Performance Title: Re: Re: ME7.5.10 Post by: gremlin on January 07, 2021, 08:23:01 AM Do you have a other Option for Stop of fuel cut off? Try to play with another BGSAWE maps. Title: Re: Re: Re: ME7.5.10 Post by: xXxCryxXx on January 07, 2021, 09:02:13 AM Try to play with another BGSAWE maps. Well thanks for that inforation ! Title: Re: ME7.5.10 Post by: bamofo on January 08, 2021, 10:03:56 AM Sorry my Mistake! :) there it is If you want to use a table use - KFTVSAKAT Just set the axis correctly and set the time in ms. If you want to just write the code to clear the bit that is forcing the fuel to shut off you will need to look for B_sabt. Title: Re: ME7.5.10 Post by: bamofo on January 08, 2021, 10:18:51 AM If you want to use a table use - KFTVSAKAT Just set the axis correctly and set the time in ms. If you want to just write the code to clear the bit that is forcing the fuel to shut off you will need to look for B_sabt. I was bored so try this. it should work over 2000RPM on decel for about 1.5 Seconds. If you want to restart the timer (Over) 2000RPM just tap the throttle. Title: Re: ME7.5.10 Post by: xXxCryxXx on January 08, 2021, 10:29:38 AM I was bored so try this. it should work over 2000RPM on decel for about 1.5 Seconds. If you want to restart the timer (Over) 2000RPM just tap the throttle. thanks! i will try it tomorrow as soon as possible! :) Title: Re: ME7.5.10 Post by: gremlin on January 08, 2021, 01:56:29 PM xXxCryxXx, it's your ID-number limited ols project.
Title: Re: ME7.5.10 Post by: bamofo on January 08, 2021, 04:35:08 PM xXxCryxXx, it's your ID-number limited ols project. Look at you helping out :-) I also sent him a project. |