|
Title: EGT sensors s4 B5, new and have read wiki please help Post by: alexbt27 on December 11, 2020, 04:22:39 PM Hello! This is probably the most asked question on this forum, i have searched but i can't seem to understand what to change in the binary file.
Removal If you want to disable your EGT sensors:[74] (Note that my old M-box xdf is wrong[75] for CDATR/ATS. Please use these offsets.) CDATR (0x18196) - Configuration byte diagnosis exhaust gas temperature regulation CDATS (0x18197) - Configuration byte diagnosis exhaust gas temperature sensor CATR (0x192CA) - Configuration byte exhaust gas temperature regulation (disables ATR)[76][77][78] Alternately, setting both of these to their maximum (1229) may help: [79] TABGSS (0x1C514) and TABGSS2 (0x1C516) - Desired exhaust gas temperature for EGT regulation You shouldn't have to touch these, but are included here for completeness: CLAATR - Error class exhaust gas temperature regulation CLAATR2 - Error class exhaust gas temperature regulation bank 2 CLAATS - Error class exhaust gas temperature sensor CLAATS2 - Error class exhaust gas temperature sensor bank 2 I get the TABGSS part, just raising the values to the maximum, is this the way to go? Or do you change CDATR CDATS CATR and what should i change it to? I have a C euro box. I have attached my binary file. It is tuned to stage 1 at some point in its life. At some company but i'm not sure what they have changed. Cheers from sweden! Title: Re: EGT sensors s4 B5, new and have read wiki please help Post by: alexbt27 on December 11, 2020, 04:24:02 PM Forgot to mention, if somebody got the time i would appriciate if you tried to explain the procedure and learn me not just change my binary file!
Title: Re: EGT sensors s4 B5, new and have read wiki please help Post by: alexbt27 on December 11, 2020, 04:52:29 PM using WINOLS searching for "CDATR, CDATS, CATR" All that get highlighted is set to "00"
The adress seems to be between 70B60 and 70BC0 Title: Re: EGT sensors s4 B5, new and have read wiki please help Post by: alexbt27 on December 11, 2020, 05:22:17 PM Okay i read through the wiki again and i think i got it now! 00=installed if i change ”00” to ”11” it Will skip it correct? :o
|