|
Title: Info about max engine load reading (191%) Post by: pieros_net on December 24, 2020, 01:40:30 AM Hi guys,
Are there some Ecu me7.5 capable of reading more than 191% of engine load? If yes, witch one? H- box is ok? Thank you men Regards Title: Re: Info about max engine load reading (191%) Post by: gman86 on December 24, 2020, 02:52:12 AM Hi guys, Are there some Ecu me7.5 capable of reading more than 191% of engine load? If yes, witch one? H- box is ok? Thank you men Regards Any ECU with rl_w Title: Re: Info about max engine load reading (191%) Post by: pieros_net on December 24, 2020, 03:06:51 AM Any ECU with rl_w thank you I need to log it so.... Title: Re: Info about max engine load reading (191%) Post by: pieros_net on January 03, 2021, 02:18:05 AM Any ECU with rl_w goodmorning bro, I did as you say, I have log "rl_w", but max load is around 210-215% it is very low compared of actual power and maf reading of 300gr/sec is it a ecu limiting or there are some wrong setup on the tuning? RS4 maf is installed and scaled properly by the maf maps. rl_w is directly proportional to the turbo pressure? because we are running at 3.2 bar, more the read limiting of 2.5. thank again ragards Title: Re: Info about max engine load reading (191%) Post by: prj on January 03, 2021, 06:34:51 AM You need 5120 mod for ECU if you want to run more than 2500 mbar absolute pressure.
Right now after 2500 your ECU is running blind. Timing and fueling are wrong. Title: Re: Info about max engine load reading (191%) Post by: pieros_net on January 03, 2021, 03:31:07 PM You need 5120 mod for ECU if you want to run more than 2500 mbar absolute pressure. Right now after 2500 your ECU is running blind. Timing and fueling are wrong. thanks bro, I just did the hack. now I have this problem: RLSOL_W and RLMAX_W are << RLMX_W KFMIRL is at row 100% = 310 LDRXL= 310 boost limiter at maximum 3.9mbar what is limiting the load requested/corrected ? |