|
Title: how can i find out what the offset is? Post by: xxx8indxxx on May 01, 2012, 11:12:05 AM ok i have a m3.8.3 map pack and it says to disable my o2 heaters i need to zero out 07CD1 AND 07CD0 BUT I ACTUALLY NEEDED TO ZERO OUT 077C4 AND 077C5 HOW CAN I FIND THE OFFSET TO TRY TO LINE UP THE REST OF MY ADDRESSES? IS IT POSSIBLE TO FIGURE OUT?
Title: Re: how can i find out what the offset is? Post by: xxx8indxxx on May 01, 2012, 11:19:03 AM would the offset be 50c ?
Title: Re: how can i find out what the offset is? Post by: ricekikr on May 01, 2012, 08:44:04 PM I don't think there's a universal offset for the whole map. Each address has a different offset. But maps that are close to each other sometimes have the same offset.
Title: Re: how can i find out what the offset is? Post by: rob.mwpropane on May 02, 2012, 04:03:28 AM would the offset be 50c ? Can I ask what you use to search for maps/locations? I don't think your going to find one offset makes everything line up. I have limited experience with ME5.9.2 and prior, but you'll have to manually line things up and define them, and then the next and so on. Title: Re: how can i find out what the offset is? Post by: bckslyr2003 on May 02, 2012, 04:08:15 AM I used a damos 3.8 file and offset it by 50c and it aligned the loaction for my o2 heaters perf#ctly
|