|
Title: MED9 - idle ignition timing Post by: drbluetongue on January 09, 2021, 09:40:19 PM Hi there
On my Golf 1.6 FSI, at idle my timing hops around between -7 and +7 degrees and can be really lumpy. It would do this even on the stock software - yet, when it would go into stratified mode on idle @ 20 degrees timing it would be buttery smooth. I'd prefer my timing advance to be a lot higher - if I change the KFMRES map to give less torque reserve at idle to achieve this, do I need to raise or lower this value in KFMRES? |