|
Title: ME 7.1.1 Audi A6 2.7T possibility to upgrade Firmware with A6 C6 features? Post by: Legendshark on January 12, 2021, 02:04:48 PM hey Guys
I am totally new here. I got an A6 C6 3.2FSI which had an engine break down and i swapped it to 2.7T BES. Now there are some Problems.... I want to have the automatic Start procedure working which works with the ecu for kl.50 starter... i researched that the 4.2 BAT and the 3.0 BBJ also have the 7.1.1 ME with 1039 firmware is there a possibility to get the software problems done. So that there ist the BES working with an ECU that got all features? modern cooling system, automatic starting, vehicle speed on can for 4F so the 5k rev limiter is working right? sorry for my english i am from germany. i dont want to tune the car it shall work as normal for german TÜV thanks guys Raphael Title: Re: ME 7.1.1 Audi A6 2.7T possibility to upgrade Firmware with A6 C6 features? Post by: Legendshark on January 12, 2021, 02:52:36 PM hey Guys I am totally new here. I got an A6 C6 3.2FSI which had an engine break down and i swapped it to 2.7T BES. Now there are some Problems.... I want to have the automatic Start procedure working which works with the ecu for kl.50 starter... i researched that the 4.2 BAT and the 3.0 BBJ also have the 7.1.1 ME with 1039 firmware is there a possibility to get the software problems done. So that there ist the BES working with an ECU that got all features? modern cooling system, automatic starting, vehicle speed on can for 4F so the 5k rev limiter is working right? sorry for my english i am from germany. i dont want to tune the car it shall work as normal for german TÜV thanks guys 4Z7907551N this is the number if the ECU from the BES. Raphael Title: Re: ME 7.1.1 Audi A6 2.7T possibility to upgrade Firmware with A6 C6 features? Post by: dus on January 18, 2021, 03:30:16 AM hey Guys I am totally new here. I got an A6 C6 3.2FSI which had an engine break down and i swapped it to 2.7T BES. Now there are some Problems.... I want to have the automatic Start procedure working which works with the ecu for kl.50 starter... i researched that the 4.2 BAT and the 3.0 BBJ also have the 7.1.1 ME with 1039 firmware is there a possibility to get the software problems done. So that there ist the BES working with an ECU that got all features? modern cooling system, automatic starting, vehicle speed on can for 4F so the 5k rev limiter is working right? sorry for my english i am from germany. i dont want to tune the car it shall work as normal for german TÜV thanks guys Raphael this is 4f 2.7t topic) http://nefariousmotorsports.com/forum/index.php?topic=17945.0 Title: Re: ME 7.1.1 Audi A6 2.7T possibility to upgrade Firmware with A6 C6 features? Post by: nyet on January 18, 2021, 06:52:58 PM So that there ist the BES working with an ECU that got all features? modern cooling system, automatic starting, vehicle speed on can for 4F so the 5k rev limiter is working right ME7.1.1 doesn't have all of those things (AFIAK), and, even worse, isn't nearly as flexible as ME7.1 which has none of those things. You may have to forgo all of that junk. Title: Re: ME 7.1.1 Audi A6 2.7T possibility to upgrade Firmware with A6 C6 features? Post by: Legendshark on January 20, 2021, 07:07:26 AM Thanks man. The Car runs for about 10k km. But i want to kill the last problems. Tanks for the other Thread it sound great. so you think there is no way to use the 4Z ME7.1.1 from the BES? To start the car correctly? The other Thread shoewd something about the speedsignal on can... so the can operate well i got RMP and others but no speedsignal? can u help me?
|