|
Title: Volvo V70 2.4T AWD Ecu wiring ME7 Post by: 6masi4 on January 16, 2021, 09:32:21 PM Hi all,
I have been searching wiring diagrams for Volvo V70 2.4t AWD 2000 P2 B5244t and haven't found simple guide what ecu pin is what(going where).. i have bought ecumaster classic ecu witch i'm planning to wire on stock ecu terminal, is it even possible? can somebody help me? Title: Re: Volvo V70 2.4T AWD Ecu wiring ME7 Post by: daniel2345 on January 17, 2021, 02:20:08 AM This will probably be impossible to get running as a stock ecu.
The electronic throttle from magneti marelli has to be driven and regulated via special, non open can protocol. I know no standalone aftermarket ecu which can do that. It will close itself, when not "used" correct. Then you have to fulfill the also non open can bus answers and responses of central electronic module and instruments, also brake controller. I guess you have no haldex controlled AWD since it is used only with 2.5T. If automatic transmission, this will be impossible. A good resource for some wiring diagrams is matthewsvolvosite. Good luck with that task |